IceMaker PR750H

The IceMaker PR750H produces up to 750 kg/h of high-density dry ice pellets from the first stroke. This is secured by the closed chamber technology which also ensures fast production shifts and a short start up time.

The IceMaker PR750H is equipped with an automatic change etruder plate, which eliminates unrecoverable waste CO₂ at start up. The PR750H also guarantees fast production time with maximum savings. The IceMaker PR750H comes with multiple pre-loaded dies that can easily be changed with a touch on the screen.

Features
  • A stainless steel frame that complies with food industry regulations
  • Wide range of high-density pellet sizes
    Fast production shifts
  • 2 minute start-up time
  • Moisture-free enclosure
Standard Included
  • 57.5kg/125.6lbs process unit
  • 512g/1.128lbs lower screen for die holder
  • 512g/1.128lbs upper screen for die holder
  • 6g/0.013lbs grip knob for screen
  • 1244g/2.742lbs outlet sprout
  • 1111g/2.449lbs flange for outlet sprout
  • 689g/1.518lbs clamp for outlet sprout
Download
Technical Data
Dimensions (mm/inch):
Length
1500 / 59
Width
1500 / 59
Height
1800 / 71
Height incl. Legs
1845 / 73.6
Weight (kg/lbs)
1000 / 2204
Rated Output:
kg/h
up to 750
lbs/h
up to 1653
Pellet Size (diameter)
mm
3 - 10 or 16
inch
0.11 - 0.39 or 0.62
Pellet Size (cylindrical)
mm
50 to 100
inch
1.96 to 3.93
Inlet Liquid CO₂ Pressure:
bar
16 - 22
psi
232 - 319
Liquid CO₂ Dryness Fraction:
The water content should not exceed 35 ppm and should not be less than 5 ppm – or equivalent to a dewpoint temperature of -66°C to -51°C (-86.8°F to -59.8°F). NOTE: The liquid CO₂ supply must be completely free of oil and must have a purity of a minimum of 99.9%. The internal diameter of the piping is 20mm (0.8 inches), and very well insulated with a minimal number of bends and fittings. NOTE: If it is over 20 m (65.6 feet) in length, always use an internal diameter of 25 mm (1inch).
Liquid CO₂ Supply Pipe:
Internal dia. 20 mm (0.8 inch), very well insulated with a minimum number of bends and fittings. NOTE: If over 20 m (65.6 feet) in length, always use an internal dia. of 25 mm (1 inch).
Outlet Pipe:
Internal dia. 125 mm (5 inch)
Max. Back Pressure on Revert Gas:
bar
0 - 1
psi
0 - 14.5
Power Supply:
3 x 400 V AC + PE, 50Hz, Imax. 32 A
Rated Power:
kW
11
Hp
15
Noise level below 75 db(A)

CONTACT ICETECH

Americas
+1 800 337 9423

EMEA
+32 (0) 13 53 95 47

Germany
+49 (0) 6551 9606-0

Asia-Pacific
+81 3 6869 2665